0.00€
Robust, high dual capacity frequency converter
Three-phase 0.75-375kW (200-230V)
Three-phase 0.75-22kW (380-480V) IP54 protection
– IP21 protection from 0.75 to 375 kW (RFI filter included up to 22 kW and with DC bus choke included up to 220kW).
– IP54 protection from 0.75 to 22 kW with EMC filter.
APPLICATION: PUMPING (ACTIVE FLAP)
iS7 robust and with high dual capability
Basic control of 2 pumps (optional up to 5 pumps), Communications: Ethernet, Modbus/TCP
These units can have their control and communication options extended by PLC and touch screens.
HOW TO REDUCE DISTURBANCES (ACTIVE FLAP)
How to reduce the disturbances generated by frequency inverters?
The variable speed drives generate two main types of disturbances in the installation: harmonic distortion (originating in the rectifier bridge) and electrical noise (radiated or conducted, produced by the inverter bridge).
Harmonic distortion: The INV inductances reduce the current harmonics that the inverter injects into the grid and also limit the inverter’s switching current and protect it against overvoltages and grid micro-voltages.
Electrical noise: EMC/RFI input filters reduce conducted electrical noise, while choke ferrites and LC filters reduce emissions between the drive and the motor.
For more information see the VMC guide to optimizing the installation of frequency converters using chokes and filters.
DRIVEVIEW SOFTWARE
DriveView software is the LS Electric drive configuration tool that monitors remotely connected equipment and facilitates commissioning and maintenance procedures.
Features:
· Modbus-RTU, LS Bus, Modbus TCP & Ethernet/IP support.
· Parameter editing, data input and download in On/Off-line mode
· Drive status monitoring
· 4-channel oscilloscope
· Parameter-based configuration wizard
0.00€
Robust, high dual capacity frequency converter
Three-phase 0.75-375kW (200-230V)
Three-phase 0.75-22kW (380-480V) IP54 protection
– IP21 protection from 0.75 to 375 kW (RFI filter included up to 22 kW and with DC bus choke included up to 220kW).
– IP54 protection from 0.75 to 22 kW with EMC filter.
APPLICATION: PUMPING (ACTIVE FLAP)
iS7 robust and with high dual capability
Basic control of 2 pumps (optional up to 5 pumps), Communications: Ethernet, Modbus/TCP
These units can have their control and communication options extended by PLC and touch screens.
HOW TO REDUCE DISTURBANCES (ACTIVE FLAP)
How to reduce the disturbances generated by frequency inverters?
The variable speed drives generate two main types of disturbances in the installation: harmonic distortion (originating in the rectifier bridge) and electrical noise (radiated or conducted, produced by the inverter bridge).
Harmonic distortion: The INV inductances reduce the current harmonics that the inverter injects into the grid and also limit the inverter’s switching current and protect it against overvoltages and grid micro-voltages.
Electrical noise: EMC/RFI input filters reduce conducted electrical noise, while choke ferrites and LC filters reduce emissions between the drive and the motor.
For more information see the VMC guide to optimizing the installation of frequency converters using chokes and filters.
DRIVEVIEW SOFTWARE
DriveView software is the LS Electric drive configuration tool that monitors remotely connected equipment and facilitates commissioning and maintenance procedures.
Features:
· Modbus-RTU, LS Bus, Modbus TCP & Ethernet/IP support.
· Parameter editing, data input and download in On/Off-line mode
· Drive status monitoring
· 4-channel oscilloscope
· Parameter-based configuration wizard
Description
Robust, high dual capacity frequency converter
Three-phase 0.75-375kW (200-230V)
Three-phase 0.75-22kW (380-480V) IP54 protection
– IP21 protection from 0.75 to 375 kW (RFI filter included up to 22 kW and with DC bus choke included up to 220kW).
– IP54 protection from 0.75 to 22 kW with EMC filter.
APPLICATION: PUMPING (ACTIVE FLAP)
iS7 robust and with high dual capability
Basic control of 2 pumps (optional up to 5 pumps), Communications: Ethernet, Modbus/TCP
These units can have their control and communication options extended by PLC and touch screens.
HOW TO REDUCE DISTURBANCES (ACTIVE FLAP)
How to reduce the disturbances generated by frequency inverters?
The variable speed drives generate two main types of disturbances in the installation: harmonic distortion (originating in the rectifier bridge) and electrical noise (radiated or conducted, produced by the inverter bridge).
Harmonic distortion: The INV inductances reduce the current harmonics that the inverter injects into the grid and also limit the inverter’s switching current and protect it against overvoltages and grid micro-voltages.
Electrical noise: EMC/RFI input filters reduce conducted electrical noise, while choke ferrites and LC filters reduce emissions between the drive and the motor.
For more information see the VMC guide to optimizing the installation of frequency converters using chokes and filters.
DRIVEVIEW SOFTWARE
DriveView software is the LS Electric drive configuration tool that monitors remotely connected equipment and facilitates commissioning and maintenance procedures.
Features:
· Modbus-RTU, LS Bus, Modbus TCP & Ethernet/IP support.
· Parameter editing, data input and download in On/Off-line mode
· Drive status monitoring
· 4-channel oscilloscope
· Parameter-based configuration wizard
Related products
Contact
If you have any questions or need more information, do not hesitate to contact us. Our technical team will advise you in choosing the most suitable product.
Contact us by e-mail by filling out the following form